Download Mango PTB 2/3 User Manual

INTRODUCTION
AB-320M/AB-330M is the mobile printer model with excellent performance.
It is integrated with Serial, USB and Bluetooth interfaces. It can be easily
used for forms or receipts printing cooperated with portable equipments,
such as PDA, Laptop, Data Samplers etc.
The main features of the printer are as follows:
1. High speed printing: 60mm per second max.
2. Low noise thermal printing.
3. RS-232, USB, Bluetooth interfaces integrated.
4. The data buffer allows the unit to receive print data even during printing.
5. Bar code printing is possible by using a bar code command.
Please do read the instructions in this manual carefully before
using your new AB-320M/AB-330M
Table of Contents
Table of Contents........................................................................ 01
Chapter 1 Overview ................................................................... 02
Chapter 2 Setting up the Printer ............................................... 03
2-1. Unpacking ............................................................................ 03
2-2. Using the Printer ................................................................... 04
Chapter 3 Interfaces and cable connection.............................. 07
3-1. Interfaces .............................................................................. 07
3-2. Connect the cables................................................................ 09
Chapter 4 R oll paper installing .............................................. 10
4-1. Installing or Replacing the Roll Paper..................................... 10
4-2. Cleaning the Print Head......................................................... 11
Chapter 5 Battery installation.................................................... 12
Chapter 6 Self test ..................................................................... 13
Chapter 7 Basic operations ....................................................... 14
7-1. Power on/off........................................................................... 14
7-2. Feed paper............................................................................. 14
7-3. Tear paper.............................................................................. 14
Chapter 8 Alarming to lack of paper .......................................... 15
Chapter 9 Using and recharging battery.................................... 16
Chapter 10 Specifications .......................................................... 17
Chapter 11 Commands ............................................................... 18
WARNING
Some semiconductor devices are easily damaged by static
electricity. In order to guard the printer against the static electricity ,
you should turn the printer "OFF", before you connect or remove the
cables on the face side. If the printer is damaged by the static
electricity, you should turn the printer "OFF".
All specifications are subjected to change without notice.
11-1. Command List....................................................................... 18
11-2. Control Commands................................................................ 19
USER'S MANUAL