Download 4 - Tyco

Pre Web Configuration
5
Click OK to close the Streaming Transport dialog box.
6
Click Apply to put your settings into effect.
7
Click OK to finish setting.
- End -
Users Introduction
3
Three levels of user access available are Administrator, Operator and Viewer.
The following options are supported for administrator:
• Live Video—to view live video, adjust image parameters and operate PTZ.
• Video/Audio—to set video and audio parameters, configure OSD and mask privacy.
• Alarm—to configure alarm and its triggers and action
• Network—to configure network parameters.
• PTZ control—to configure PTZ control parameters.
• Storage—to configure and manage storage..
• System—to configure system parameters, including user management.
• Language switch
• Login/Logout
The following options are supported for operator:
• Live Video—to view live video, adjust image parameters and operate PTZ.
• Video&Audio—to set video and audio parameters, configure OSD and mask privacy.
• Alarm—to configure alarm, trigger and action.
• Network—to configure network parameters.
• PTZ control—to configure PTZ control parameters.
• Storage—to configure and manage storage.
• System—to configure system parameters, excluding user management.
• Language switch
• Log in/out
The following options are supported for viewer:
• Live Video-to view Live Video, adjust image parameters adjusting and operate PTZ.
Login & Logout
Login to the ADST-E1 Web Page
Procedure 3-2 Logging into the ADST-E1 Web Configuration Page
Step
Action
13