Download OPERATING MANUAL

Maintenance function
2. Click [Yes].
The coordinate information parameters
are copied to the user parameters.
3. After it is completed, click [OK].
4. Cycle the power of the applicable product.
12.8 Recommended macro operation copy
The recommended macro operation parameters saved in the encoder can be copied to the user parameters of an
applicable product.
1. Click [Recommended Macro Operation
copy] from the [Communication] menu.
2. Click [Yes].
The recommended macro operation
parameters are copied to the user parameters.
3. After it is completed, click [OK].
4. Cycle the power of the applicable product.
−69−