Download Installation Manual

Transcript
SMA Solar Technology AG
Parameter
Parameter name Range
Default
Parameter Description
Ofs_FanHsCnt
0h
Total operating time of the heat sink fan
in the Control Cabinet.
0 ... 2147483 h
The change of the Ofs_FanHsCnt
parameter may be necessary if you
exchange your Sunny Central and want
to use the data from the old device.
Ofs_FanTrf1Cnt
0 ... 2147483 h
0h
Total operating time of transformer fan
1.
The change of the Ofs_FanTrf1Cnt
parameter may be necessary if you
exchange your Sunny Central and want
to use the data from the old device.
Ofs_FanTrf2Cnt
0 ... 2147483 h
0h
Total operating time of transformer fan
2.
The change of the Ofs_FanTrf2Cnt
parameter may be necessary if you
exchange your Sunny Central and want
to use the data from the old device.
Ofs_h_On
0 ... 2147483 h
0h
The Sunny Central's total number of
hours of operation.
The change of the Ofs_h_On parameter
may be necessary when you exchange
your Sunny Central and want to use the
data from the old device.
Ofs_h_Total
0 ... 2147483 h
0h
Total number of operational hours with
grid feeding
The change of the Ofs_h_Total
parameter may be necessary when you
exchange your Sunny Central and want
to use the data from the old device.
ParaLod
–––, Set1, Set2,
Factory
–––
Loading parameters from SD card.
ParaSto
–––, Set1, Set2
–––
Saving parameter on SD card.
Plimit
0 ... 1000 kW
250 kW
Upper limit for AC output power
Factory: Factory parameter settings are
being loaded.
This parameter cannot be changed.
Installation Guide
SC250U-IUS084912
69