Download Installation Manual
Transcript
SMA Solar Technology AG Parameter Parameter name Range Default Parameter Description Ofs_FanHsCnt 0h Total operating time of the heat sink fan in the Control Cabinet. 0 ... 2147483 h The change of the Ofs_FanHsCnt parameter may be necessary if you exchange your Sunny Central and want to use the data from the old device. Ofs_FanTrf1Cnt 0 ... 2147483 h 0h Total operating time of transformer fan 1. The change of the Ofs_FanTrf1Cnt parameter may be necessary if you exchange your Sunny Central and want to use the data from the old device. Ofs_FanTrf2Cnt 0 ... 2147483 h 0h Total operating time of transformer fan 2. The change of the Ofs_FanTrf2Cnt parameter may be necessary if you exchange your Sunny Central and want to use the data from the old device. Ofs_h_On 0 ... 2147483 h 0h The Sunny Central's total number of hours of operation. The change of the Ofs_h_On parameter may be necessary when you exchange your Sunny Central and want to use the data from the old device. Ofs_h_Total 0 ... 2147483 h 0h Total number of operational hours with grid feeding The change of the Ofs_h_Total parameter may be necessary when you exchange your Sunny Central and want to use the data from the old device. ParaLod –––, Set1, Set2, Factory ––– Loading parameters from SD card. ParaSto –––, Set1, Set2 ––– Saving parameter on SD card. Plimit 0 ... 1000 kW 250 kW Upper limit for AC output power Factory: Factory parameter settings are being loaded. This parameter cannot be changed. Installation Guide SC250U-IUS084912 69