Download AS2000: The Basics

Site Planning
Shelf Planning
Worksheets for
ACP Modules
Table 3-6
These worksheets help define which modules are located in each
shelf of a node. Table 3-5 provides an example of a shelf-planning
worksheet for ACP-based modules
Shelf Planning Worksheet for ACP-based Modules
Access System 2000
Shelf Worksheet for
ACP-based Modules
ACP Shelf Timing Table
Slot
Date: __9-22-98_____________
Node ID: __1411_____________
Shelf Number: __1 of 2_______
Slot
Module
CIM/DIM/NIM
Source
Restoral
1. _____2____
1. __Net2____
1. ___yes____
2. _____3____
2. __Net1____
2. ___yes____
3. _____1____
3. __Internal__
3. ___yes____
Passing Data
to:
Shelf,Slot
Circuit
Name
N/A
N/A
N/A
Line Type
Circuit
(T1/E1/FT1/T3) Name/Number
1
NCM 2000
NIM 2000
2
DIDCSU 2912
CIM 29010
T1
X20_ATL
1,3
didcsu_did_3
3
DIDCSU 2912
CIM 29010
T1
N/A
N/A
N/A
3
QUAD 2164
CIM 2064
T1
X21_SFO
1,4
QUAD_1
4
IMUX 2160
DIM 2660
N/A
N/A
N/A
A
Power Supply PAC_2930___
AC slot A breaker 110Vac@2 amp
DC slot A fuse # ___________
B
Power Supply PDC 2930___
AC slot B breaker ______________
DC slot B fuse # __10 amp__
The shelf planning worksheet is filled out as follows:
• Node ID: The name of the node in which the shelf resides. The
Node ID is a numeric string (up to five digits) that management
software uses to identify the node.
• Shelf ___of ___: Used to track the number of shelves in a node.
The first blank is the number of the shelf for the worksheet,
and the second blank is the number of shelves in the node. Set
the shelf’s address switch to the number entered on the
worksheet. Duplicate shelf numbers cannot be used within
the same node.
• Slot: List for each available slot in the shelf.
• ACP Shelf Timing Table
• Slot: Indicate the slot number for the module that is the:
1. primary, 2. secondary and 3. tertiary timing sources.
• Source: Indicate where the timing source for primary,
secondary and tertiary (for example, internal, net1, etc).
• Restoral: Set auto restoral to on or off.
Verilink Access System 2000: The Basics
3-11