1
Download User`s Manual
Transcript
VIP User’s Manual atpm store [erase] The atpm store command store all atpm tables into non-volatile memory. Syntax description erase (Optional) Erase the non-volatile before storing the dial plan database. This option is not recommended except the very first time you use the atpm store command. Destination Table Management Commands atpm dadd dest_id port port# The atpm dadd dest_id port command adds an local destination entry into the atpm destination table. A local destination entry is one of the telephony ports on VIP. Syntax description dest_id port# Destination ID. For each destination, you need to assign it a unique identifier between 1 and 65536. The number of the telephony port. Example The following example shows how to assign ID 1 to the first telephone port on TIM slot A and add an entry in the destination table designating it. ITG>atpm dadd 1 port 0 <Enter> atpm dadd dest_id h323 dest_ip_addr [ip_port] The atpm dadd dest_id h323 command adds a h323 type remote destination entry into the atpm destination table. A remote destination entry is typically another VIP or H323 gateway. Syntax description dest_id Destination ID. For each destination, you need to assign it a unique identifier between 1 and 65536. dest_ip_addr The IP address of the remote destination. ip_port (Optional) Base port number VIP uses to establish voice with that remote destination. Example The following example shows how to add a remote destination whole IP address is 192.168.0.3 to the destination table and assign an ID 200 to that destination. ITG>atpm dadd 200 h323 192.168.0.3 <Enter> 76 Command Line Interface
