Download Manual - UNICORN

User’s Manual
1
Chapter 1. Introduction
ENDAT-4946i/M supports high performance processor of Intel® Celeron® M 423
(for ENDAT-4946M), Intel® Core™ Solo, Intel® Core™ Duo and Intel® Core™2
Duo processor (for ENDAT-4946i) with 533 and 667 Front Side Bus. It also
supports high speed DDR-2 memory with 64-bit wide interfaces with non-ECC
DIMM (up to 2GB). Only Double-Data-Rate Two Synchronous Dynamic Random
Access Memory is supported and the speed of memory can be 533 and 667 MHz.
ENDAT-4946i/M provides an integrated graphics (Intel® Graphics Media
Accelerator 950) accelerator delivering cost competitive 3D, 2D, and video
capabilities.
ENDAT-4946i/M video engines support video conferencing and other video
applications. Instead of a dedicated local graphics memory interface,
ENDAT-4946i/M uses a UMA configuration for optimal memory utilization and
performance that deliver 3D graphics with sharp images, fast rendering, smooth
motion and extreme detail.
ENDAT-4946i/M contains one integrated Serial ATA host controllers capable of
independent DMA operation on two ports. The SATA controllers are completely
software transparent with the IDE interface, while providing a lower pin count and
higher performance. The data transfer rate is up to 300 MB/s.
ENDAT-4946i/M is an ideal model for various kind of application:
- POS system
- KIOSK
- Interactive system
- Airport Terminal Controller
- Industrial controller
- Digital entertainment
- Embedded system equipment