Download SCC Quick Start Guide - National Instruments

Transcript
SC-2350 Carrier Considerations
The SC-2350 has integrated software support for Transducer Electronic Data Sheet (TEDS) sensors. For
more information about using TEDS with SCC modules, refer to the SC-2345/2350 Carrier User
Manual.
The SC-2350 carrier has 16 channels of analog input sockets, J1 to J8, in one row of eight sockets. You
can use any analog input SCC module in a single-stage analog input configuration. In addition, it
contains two analog output sockets, J17 and J18, for outputting up to two channels of data with the
appropriate SCC modules inserted.
The SC-2350 does not support dual-stage configuration or digital signals. You cannot use the SC-2350
carrier with the following modules:
•
SCC-DI01
•
SCC-DO01
•
SCC-RLY01
•
SCC-CTR01
Figure 15 shows the locations of SC-2350 carrier components.
4
©
5
6
7
COPYRIGHT 2003
J33
J30
J27
DATA+ 0/8 DATA+ 1/9
RETURN 0/8 RETURN 1/9
J31
J29
J28
J34
DATA+ 2/10
DATA+ 3/11
DATA+ 4/12
DATA+ 5/13
RETURN 2/10 RETURN 3/11
RETURN 4/12 RETURN 5/13
TEDS CONNECTIONS FOR ANALOG INPUT
J26
DATA+ 6/14
RETURN 6/14
J32
DATA+ 7/15
RETURN 7/15
3
DATA+ 0/1
RETURN 0/1
TEDS ANALOG
OUTPUT
8
Analog Output
AO 1
Analog Output
AO 0
Analog Input
AI 7/15
Analog Input
AI 6/14
Analog Input
AI 5/13
Analog Input
AI 4/12
Analog Input
AI 3/11
Analog Input
AI 2/10
Analog Input
AI 1/9
1
Analog Input
AI 0/8
J24
2
9
J21
10
AI 0/8
AI 1/9
AI 2/10
AI 3/11
AI 4/12
AI 5/13
AI 6/14
AI 7/15
AO 0
AO 1
J25
11
1
2
3
4
SCC Socket Reference Designator
SCC Socket
SCC Key Slot
50-Pin Test Header
5
6
7
8
Serial Number
Assembly Number
Screw-Terminal Block
J24
9 Power LEDs
10 J25
11 J21
Figure 15. SC-2350 Carrier with TEDS
© National Instruments Corporation
15
SCC Quick Start Guide