Download Manual - ADLINK Technology

1.2
Features
•
PICMG 2.0 CompactPCI Specification R3.0 Compliant
•
PICMG 2.1 CompactPCI Hot-Swap Specification R2.0 Compliant
•
PICMG 2.16 CompactPCI Packet Switching Backplane R1.0
Compliant
•
Standard 6U form factor with 2-slot (8TE/HP) space
•
Design for Dual Intel Socket-370 Tualatin/Pentium-III CPU
•
Supports 66/100/133MHz Front Side Bus (FSB) frequency
•
Supports up to Intel FC-PGA2 Tualatin CPU at 1.26GHz
•
Three 184-pin DIMM sockets support up to 3GB DDR266 SDRAM
with ECC support
•
Supports 64-bit CompactPCI with 66MHz
•
Dual EIDE interface.
•
Supports 4 bus -master PCI devices on 64-bit/66MHz CompactPCI
bus peripheral slots
•
Supports 7 bus -master PCI devices on 64/32-bit @33MHz
CompactPCI bus peripheral slots
•
Build-in two USB ports, two serial ports, one parallel port
•
Optional VGA with resolution up to 1600x1200 in 32-bit true color
•
On-board triple 10/100Mbps Ethernet ports, two RJ-45 port on front
faceplate by Intel 82559 controller with one RJ-45 port on rear I/O
transition module by VT8233 built-in controller.
•
Supports Intel pre-boot execution environment (PXE) for remote
boot.
•
Optional SoundBlaster Pro compatible AC97 audio on rear I/O
transition module (only for big quantity OEM project)
Introduction • 3