Download Patient chair control Quick reference card
Transcript
Planmeca Compact i Quick reference card Patient chair control Touch panel Take into use the required dentist settings Chair to autoposition A Short activation Backrest down Long activation Chair to autoposition B Short activation Backrest up Long activation Chair to autoposition C Short activation Chair up Long activation Chair to autoposition D Short activation Chair down Long activation Chair to spit position Short activation when LED OFF Chair to previous position Short activation when LED ON Chair to spit position only Long activation Foot control Chair to autoposition C Short activation Long activation Short activation Chair to autoposition A C Chair up A B Long activation Backrest down Short activation Chair to autoposition B Long activation Backrest up Short activation Long activation D Chair to autoposition D Chair down Chair to spit position Chair to spit position Dental unit control Touch panel Select language from list Change language for dental unit Cup fill and bowl rinse Short activation Cup fill as long as pressed (manual) Long activation Bowl rinse Short activation Preprogrammed door open / assistant call function Short activation Door open / assistant call function as long as pressed (manual) Long activation Operating light On Off Short activation Intensity of operating light Long activation Start required timer Select timer number Maintenance procedure Select procedure Foot control No instrument activated Preprogrammed unit function Preprogrammed unit function Assistant call Planmeca Compact i Short activation Cup fill and bowl rinse Long activation Cup fill as long as pressed (manual) Instrument control Touch panel Instrument speed / power Off reduction On Water & air Scaler Spray 1 Air No spray Spray 2 Automatic chip blow On Off Micromotor Reverse rotation Off On Scaler Operation / working mode Turbine Quickstart Off On Polisher 8-second cleaning cycle Fibre optic light Off On Polisher 80-second cleaning cycle Foot control Micromotor or turbine (instrument activated) Scaler (instrument activated) Drive instrument Drive scaler Drive instrument Short activation Water & air Air Long activation Manual chip blow Drive scaler No spray Polisher (instrument activated) Short activation Spray 2 Polymerisation light (unit controlled instrument activated) Drive polisher Start Stop Drive polisher Long activation Spray 1 Start Stop No function Momentary cleaning water Intraoral camera (instrument activated) Freeze Unfreeze Freeze Short activation Preprogrammed instrument function Unfreeze Save still picture Touch panel, Bien-Air MX2 micromotor Select preset for MX2 micromotor Select required preset from list When torque is enabled: toggle between RPM limit On Torque limit On Off Off Normal Auto reverse Auto forward Quick reference card Motorised headrest control Foot control Short activation Normal mode On Long activation Tilt mode On Off Lengthen headrest Normal mode Tilt mode Normal mode Anatomical movement down Off C Move headrest up A B Tilt mode Tilt headrest backward Normal mode Anatomical movement up Tilt mode Tilt headrest forward D Normal mode Shorten headrest Move headrest down Tilt mode Programming Patient chair autoposition settings Select dentist number Move chair to required position Start programming Press desired button where to store chair position Switch operating light On Off Accept new autoposition Unit settings Most programming follows this simple sequence: Start programming Select function Adjust value Accept new value Instrument settings Most programming follows this simple sequence: Start programming Select function Adjust value For detailed instructions, please see the user’s manual. Copyright Planmeca. Rights for changes reserved. www.planmeca.com Accept new value 10029686_2/09.2011 Activate instrument