Download KG-UV123 V4 Programmer Help
Transcript
76 KG-UV123 V4 Programmer Help result in your radio "acting funny" every time you program it. That's because something is getting reset in the radio by a setting in this file. From the main screen of the Programmer, select Settings | Radio Menu Settings. Explore these screens. If you fear you have made changes you don't want, click the "X" at the upper right of the Settings screen. Answer No to the prompt to save. Then click the "X" again to close. The screen will close without saving anything you have done. Details for the options on this page are found on several pages of this Help. Each page contains the details for the options on that page. The pages in the TOC begin with the words "Radio Menu Settings". The information there can help you decide how best to customize a setting. Once you complete your selections: Click File | Save If you are working in a default file (Untitled.rsf), you will be prompted for a filename. Enter a name for this file. This can be the same as the name you're using for the memory channel information or it can be a name unique to these settings. IKf you're at a loss, use "Settings". Click Save to close the Save dialog Click File | Exit to close the Settings screen. The Programmer will take it from here making sure these customized settings go to the radio along with the memory channel information. Creating and using multiple Global settings files There may be global settings of the radio that you want configured differently for different activities. You can make changes to your settings file and save it separately. Having multiple memory channel files (."radio name") and multiple global setting files (. rsf) gives you the ability to mix and match the features of your radio to suit your needs. This makes it easy to customize the radio for a special event without disturbing the original programming files. Then once the event is over, simply reprogram the radio with the memory channel information and settings that you use everyday. When a new file is begun, the same settings used in the last settings file saved will appear automatically in this new file. You need not re-enter the settings each time, nor are you forced to always begin a new file by renaming an existing file. Your settings © 2013 RT Systems, Inc.