Download ConneXium TCSESB Basic Managed Switch Web

Redundancy
Parameter
Meaning
Bridge ID
(read only)
The local Bridge ID, made up of the local
priority and its own MAC address.
The format is 
ppppp / mm mm mm mm mm mm, 
with: ppppp: priority (decimal) and
mm: the respective byte of the MAC
address (hexadecimal).
This field displays the number of changes
since RSTP started.
This field displays the time that has
elapsed since the last network
reconfiguration.
This frame shows whether there is a
configuration conflict.
In this case, the device with the MAC
address displayed is located outside the
MRP-Ring. The priority displayed for this
device is better (numerically smaller) than
the priority of the root bridge in the MRPRing.
To resolve this conflict, set the device
displayed to a worse priority (numerically
greater) than the priority of the root bridge
in the MRP-Ring.
Topology 
Changes
Time since
last change
Information
6.2 Rapid Spanning Tree
Possible
Values
Default Setting
Table 25: Global Spanning Tree settings, basic function
Note: The parameters Forward Delay and Max Age have the following
relationship:
Forward Delay ≥ (Max Age/2) + 1
If you enter values that violate this rule, the device will replace these values
by the last valid values or the default values.
S1A78429 - 12/2010
91