Download Rabbit User`s Manual
Transcript
A.2 Rabbit 4000 DC Characteristics Table A-3. Rabbit 4000 Absolute Maximum Ratings Symbol Parameter Maximum Rating TA Operating Temperature -40° to +85°C TS Storage Temperature -55° to +125°C VIH Maximum Input Voltage VDDIO + 0.3 V (max. 3.6 V) VDDIO Maximum Operating Voltage 3.6 V Stresses beyond those listed in Table A-3 may cause permanent damage. The ratings are stress ratings only, and functional operation of the Rabbit 4000 chip at these or any other conditions beyond those indicated in this section is not implied. Exposure to the absolute maximum rating conditions for extended periods may affect the reliability of the Rabbit 4000 chip. Table A-4 outlines the DC characteristics for the Rabbit 4000 at 3.3 V over the recommended operating temperature range from TA = –40°C to +85°C, VDDIO = 3.0 V to 3.6 V. Table A-4. 3.3 Volt DC Characteristics Symbol VDDIO Min Typ Max I/O Ring Supply Voltage, 3.3 V 3.0 V 3.3 V 3.6 V I/O Ring Supply Voltage, 1.8 V 1.65 V 1.8 V 1.90 V VIH High-Level Input Voltage (VDDIO = 3.3 V) 2.0 V VIL Low-Level Input Voltage (VDDIO = 3.3 V) 0.8 V VOH High-Level Output Voltage (VDDIO = 3.3 V) 2.4 V VOL Low-Level Output Voltage (VDDIO = 3.3 V) 0.4 V IIO IDRIVE 84 Parameter I/O Ring Current @ 29.4912 MHz, 3.3 V, 25°C All other I/O (except TXD+, TXDD+, TXD-, TXDD-) 12.2 mA 8 mA RabbitCore RCM4000