Download UPiS Manual

Uninterruptible Power intelligent Supply
User Manual Version 1.01
Print Date: 01.11.2013
Firmware Updates Road Map
The UPiS is a hardware platform that covers many features. Most of them are supported by
the Firmware Version Release 1.00. However some of them are planned features, and are
still under testing or under development phase and will be released soon in the next
versions of firmware. The following table describes the Implementation and Versions
Release Road Map.
Firmware
Version
1.00
1.10
Features Added
UPiS Official Firmware Version Release
1. USB – RS232 interface bridge option (powering matters)
1.20
1. Original micro USB RaspberryPi® powering (the RPI mode)
full implementation
2. Onboard ESD Protected I/O pin, controlled via RS232
3. Low Powering Mode when cabling supply is available
1.30
1. Extended Tiny Encryption Algorithm (XTEA) cryptographic
Customer Software Protection System (with custom defined
protection keys)
2. RTC based Alarms for RaspberryPi® wake-up and sleep
1.40
3. Event Driven Advanced Scripting Language
© Pi Modules
Intelligent Modules for your RaspberryPi®