Download MS332 Operation Manual - Electro
Transcript
Serial Communications \Remote Analog Output Calibration Procedure (cont.) Exit Jog Mode 1) Open the MS332 Run Switch 2) Un-assign the Jog Switch-Input function from the Switch-Input by writing 0 to the corresponding Switch-Input function assignment variable. Example: If you previously wrote 1 (Jog) to Var07.03 (address 47030) assigning Jog to Switch-Input 4, write 0 to it now to un-assign Jog from it. Ref. Sect. page - 57 (bA02.XX) (101701)