Download User Manual - Listen Technologies

Transcript
In this mode when the Listen Button is pressed the unit will increment through the channel list to the
next programmed channel. For example if there are three channels programmed (English, Spanish
and German) and the unit is on English and the button is pressed the unit will switch to Spanish. If the
button is pressed again the unit will switch to German and an additional press will take the unit back to
English again.
There are two modes to customize the channel list for the Listen Button. The two modes are Automatic
Channel Selection and Manual Channel Selection. These modes can be programmed using the unit
or via the IDSP Software Suite. See page 17.
Your Listen receiver has been shipped to you with the Automatic Channel Selection, Auto 4 (channels
1, 2, 3 and 4) enabled.
LR-5200-IR IDSP RECEIVER MANUAL
l
PAGE 10