Download DeploymentManager Ver6.1 Installation Guide

Transcript


If the module for the machine model was installed before upgrading, you need
to install it again. About the module for the machine model, contact your sales
or support representative.
When you installed the following modules for the machine model, you do not
need to install them again after upgrading.
・ DPM51_52_004
・ DPM51_52_007
・ DPM51_52_008
・ DPM51_52_009
・ DPM51_52_010
・ DPM51_52_011
・ DPM51_52_012
・ DPM51_52_013
If you have set the cooperation between DPM's TFTP service and
MasterScope Network Manager's TFTP service, you need to configure it again
after upgrading the DPM Server. For the setting method, see Section Appendix
E, "Using DPM Server and MasterScope Network Manager on the same
machine."
The screens that appear during the installation may vary according to the OS.
If the Windows Firewall/Internet Connection Sharing (ICS) service is running, the
port required for the DPM Server will open automatically.
For details on the opened port, see Appendix D, "Network Port and Protocol List" in
Reference Guide.
The upgrade of the DPM Server is completed.
62