Download User Manual

MENU
ITEM
FUNCTION
SETTING
Set-up menu
Paper out
override
Select whether to
detect paper end or
not.
No
Yes
Print
Registration
1
Adjust the print
starting position on
printing in the
reverse direction.
(The position moves
to the right or left in
1/720 in
increments.)
-10 – -1
0
+10 – +1
Print
Registration
2
Adjust the print
starting position on
printing in the
reverse direction.
(The position moves
to the right or left in
1/720 in
increments.)
-10 – -1
0
+10 – +1
Print
Registration
3
Adjust the print
starting position on
printing in the
reverse direction.
(The position moves
to the right or left in
1/720 in
increments.)
-10 – -1
0
+10 – +1
7 or 8 Bits
Data Word
Set the character
code and graphics
data units to 7 or 8
bits.
8
7
(ML emulation only)
Operator
panel
function
Select full or limited
operation.
Full operation
Limited operation
Reset inhibit
Set whether to
enable or disable an
initial command.
No
Yes
Print
suppress
effective
Set whether to
enable or disable a
print suppress setup
command.
Yes
No
ML1120/ML1190 eco User’s Guide – Operating instructions > 62