1
Download User Manual
Transcript
MENU ITEM FUNTION SETTING Set-up Menu Pitch Command Select the validity of a character pitch command. Valid Set I-Prime signal control of the Centronics interface. Invalid Set whether to enable or disable Auto Feed XT signal of the Centronics interface. Valid Parallel I/F I-Prime Auto Feed XT Invalid Buffer Print Buffer Clear Invalid (EPSON emulation only) Bi-Direction Serial I/F Menu Parity Set whether to enable or disable Two-way communication of the Centronics interface. Enable Set parity. None Disable Odd Even Ignore Serial Data 7/8 Set serial data length. 8 bit Bits Protocol Set protocols. DTR 7 bit X-ON/X-OFF DTR & X-ON/X-OFF Diagnostic Test Baud Rate Set/Cancel loop testing of the serial interface. No Yes Set the transmission 9,600 bps speed of the serial 4,800 bps interface. 2,400 bps 1,200 bps 600 bps 300 bps 19,200 bps ML1120/ML1190 eco User’s Guide – Operating instructions > 77
