Download PBA428 - Mettler

Transcript
2
Setting up the weighing platform
2.1
Selecting the site of installation
➜➜ The surface must be able to bear the weighing platform under
maximum load at the points of support. At the same time it should
be so stable that no vibrations arise during weighing. This is also
to be observed when installing the weighing platform in conveyor
and similar systems.
➜➜ If possible, platform installation should be located in an area free
from vibration.
Ambient
conditions
➜
➜➜ Observe the following ambient conditions:
– –– No direct sunshine
–– No excessive temperature fluctuations
–– Temperature range –10 °C to +40 °C
05/09
Order number 72230077
­METTLER ­TOLEDO
User Manual PBA428
5