Download Protocol for RS232/485 - Visilab Signal Technologies

IRMA-7
PACKET PROTOCOL SPECIFICATIONS
Set the Voltage Output Source:
I7SVOUT
87
User's Guide for Applying the Protocol
0x57
command sent by master:
------------------------|adr|len|com|d00|crh|crl|
setchar
------------------------1
2
3
4
5
6
byte
len = 1
reply sent by slave:
--------------------|adr|len|sta|crh|crl|
--------------------1
2
3
4
5
byte
len = 0
d00 output field is used as follows:
symbol
dec. value
hex. value
--------------------------------------------------------------------------------Moisture
0
0x00
Web temperature
1
0x01
Head temperature
2
0x02
Extra temperature
3
0x03
The parameter will change the selection with a delay of 5 ms maximum to be seen at the analog
output connector.
28