1
Download J-Link / J-Trace User Guide (UM08001)
Transcript
214 CHAPTER 6 Flash download First, choose the device in the project settings if not already done. The device settings can be found at Project->Options for Target->Device. To enable the J-Link flash loader J-Link / J-Trace at Project->Options for Target->Utilities has to be selected. It is important that "Update Target before Debugging" is unchecked since otherwise uVision tries to use its own flashloader. J-Link / J-Trace (UM08001) © 2004-2014 SEGGER Microcontroller GmbH & Co. KG
