1
Download Manual - Amazon Web Services
Transcript
Printing 13.1. Set-up and start of the plot Press the « Set-up Plot » key from the « F(t) », « XY », « Start/Stop » or « Replay » functions. Under « XY » or « F(t) », the scan must be stopped ( « Freeze screen » key) to access to this key. Under « Replay » or « Start/Stop», a memory block or a file must be displayed on screen to access to this key. For the 8460, there are 2 possibilities: - Internal printer: the internal printer of the recorder is selected, you just have to choose the length of the paper - External printer: the printing will be performed on an external printer You have to set up a few parameters to use an external printer: Printer Set-up: selection of the type of printer in a list; see the following chapter. Margin: width of the margin in millimeters (depends on the selected printer) Launch plot: starts the printing Page 13.2
