Download - SIMetrix

User’s Manual
Pulse, sine, noise and DC waveforms may be specified using the tab sheets of the same
name. You can also specify a Piece wise linear source, exponential source or a single
frequency FM source. To enter one of these select the Text tab and enter the
appropriate syntax for the source. Please refer to Voltage source in the Simulator
Reference Manual for more information on these sources. The AC sheet is for AC
analysis only.
With the universal source, you can specify transient, AC and DC specifications
simultaneously. This is not possible with any of the other sources.
Other Sources
Sine Tone Burst
Generates a sequence of sinusoidal bursts with a user defined number of cycles per
burst, burst frequency and tone frequency.
Use menu Place | Voltage Sources | Sine Tone Burst then place device in the usual
way. Editing the device will bring up a dialog with 6 parameters:
46
Parameter
Description
Burst Freq.
Burst frequency
Tone Freq.
Frequency of the sinusoidal tone