Download BESA 12 - aetool
Transcript
7. Press key will show the results of the test (Figure 61): Results: Good At 3,000 rpm, No load Test: Average Charging Volts: 14.2V Press [Enter] to continue to Loading Test. Figure 61 8. If either minimum or maximum charging volts are not within the voltage range limits then it will display one of the screen as below (Figures 62 & 63) and it will prompt you to check the charging system for the fault. Results: Low charge Results:High charge At 3,000 rpm, No load Test: >13.3V: Min 13.2V At 3,000 rpm, No load Test: <15.0V: Max. 15.6V Check for loose belt and the alternator. Check alternator and the regulator. Figure 62 Figure 63 Testing with load at 2,000 RPM As more electrical accessories, such as lights, heater, air condition, car stereos, etc. were used; the electro-motive force decreases and this will allow more amperage from the alternator to flow into the battery to compensate for the added load. This test is to check the alternator’s behavior during loading. ‐ 44 ‐ | AE TOOL LTD. l USER’S MANUAL VERSION 1307 l www.aetool.com