Download BESA 12 - aetool

Transcript
7. Press
key will show the results of the test (Figure 61):
Results: Good
At 3,000 rpm,
No load Test:
Average Charging Volts:
14.2V
Press [Enter] to continue
to Loading Test.
Figure 61
8. If either minimum or maximum charging volts are not within the voltage
range limits then it will display one of the screen as below (Figures 62 & 63)
and it will prompt you to check the charging system for the fault.
Results: Low charge
Results:High charge
At 3,000 rpm,
No load Test:
>13.3V: Min 13.2V
At 3,000 rpm,
No load Test:
<15.0V: Max. 15.6V
Check for loose belt
and the alternator.
Check alternator and
the regulator.
Figure 62
Figure 63
Testing with load at 2,000 RPM
As more electrical accessories, such as lights, heater, air condition, car stereos,
etc. were used; the electro-motive force decreases and this will allow more
amperage from the alternator to flow into the battery to compensate for the
added load. This test is to check the alternator’s behavior during loading.
‐ 44 ‐ | AE TOOL LTD. l USER’S MANUAL VERSION 1307
l
www.aetool.com