Download FIBRE to SATA II RAID SUBSYSTEM User Manual

FIBRE to SATA II RAID SUBSYSTEM
The following table gives an explanation of each field available on this screen:
View Logical Volumes
Field
Description
Logical Volume
Name of the Logical Volume.
Serial Number
Internal Serial Number of the Logical Volume.
Capacity (GB)
Capacity of the Logical Volume in Gigabytes
Status
Indicates whether the volume is a global or private logical
volume.
RAID
The name of the RAID on which the Logical Volume was
created.
Private Logical Volume Mapping
Field
Description
Name
Name of the Logical Volume.
Host Name
Displays any hosts, that have been mapped to a private LV.
Port 1A
Indicates whether the port is enabled of disabled for the
private volume.
Port 1B
Indicates whether the port is enabled of disabled for the
private volume.
Port 2A
Indicates whether the port is enabled of disabled for the
private volume.
Port 2B
Indicates whether the port is enabled of disabled for the
private volume.
LUN
LUN to which the volume has been mapped for a specific
host.
Global Logical Volume Mapping
Field
Description
Name
Name of the Logical Volume.
LUN (Port 1A)
LUN to which the global volume has been mapped to at port
1A
LUN (Port 1B)
LUN to which the global volume has been mapped to at port
1B
LUN (Port 2A)
LUN to which the global volume has been mapped to at port
2A
LUN (Port 2B)
LUN to which the global volume has been mapped to at port
2B
120
User Manual