Download Digital Super Hybrid System

B
3
Features
The functions of the listed buttons are described below:
AUTO ANSWER / MUTE: This dual function button is used for
extension auto-answer and microphone mute during a conversation.
AUTO DIAL / STORE: Used for System Speed Dialling and
storing program changes.
CO (Central Office line): Can make or receive an outside call or
can be re-assigned to a different CO or to various feature buttons.
CONF (Conference): Used to establish a three-party conference.
FLASH/RCL: Allows you to disconnect the current call and
originate another call without hanging up (Recall). Sends a
Register Recall signal to the Central Office or a host PBX to access
their features (External Feature Access).
Function: Used to perform the displayed function / operation.
FWD / DND (Call Forwarding / Do Not Disturb): Used to
program Call Forwarding, set Do Not Disturb.
HOLD: Used to place a call on hold.
INTERCOM: Used to make or receive intercom calls.
Jog Dial: Used to adjust the ringer, speaker, handset and headset
volume and the display contrast. With the KX-T7431, KX-T7433
and KX-T7436, it can also be used to select data from the Call
Directory and the System Feature Access Menu on the display.
MESSAGE: Used to send a message or display current message.
MODE: Used to shift the display in order to access various
features.
MONITOR: Used for handsfree operation.
PAUSE: Inserts a pause in a speed dial number. With an analogue
proprietary telephone, it is used as the PROGRAM button.
PF (Programmable Feature): This flexible button can be
programmed to be a One-Touch Dialling, FWD / DND, SAVE,
Account, CONF (Conference) or Voice Mail Transfer button, as
desired.
PROGRAM: Used to enter / exit the Programming mode. With
the KX-T7220 and KX-T7250, it can also be used as the PAUSE
button.
RECALL: Allows you to disconnect the current call and originate
another call without hanging up (Recall). Sends a Register Recall
signal to the Central Office or a host PBX to access their features
(External Feature Access).
REDIAL: Used for Last Number or Automatic Redial.
SAVE: Used to store a dialled telephone number for Saved Number
Redial.
SELECT: Used to select the displayed function or to call for the
displayed phone number.
3-18.0
Features