Download WaveMaster™
Transcript
Frequently Asked Questions FREQUENTLY ASKED QUESTIONS FAQs listed in Table 17 provide information about the internal operation of WaveMaster, and answers to the most commonly-encountered problems. Table 17. Frequently Asked Questions QUESTION RESPONSE How does it work? The WaveMaster is a high diffraction order spectrometer. Wavelength is determined by careful measurement of the separation between the diffracted orders. Much of the accuracy and simplicity in use is achieved through software-implemented algorithms running in the digital signal processor and conventional microprocessor in the instrument. Why won't it power up? If WaveMaster is connected to the mains power unit and the yellow pulse received light does not light, then the rear panel connector may not be making a good connection and should be re-inserted. It is also possible that the power supply has failed. This should give 12V DC with the centre of the connector positive. Why does it power up but powers off very shortly afterwards? This does happen very occasionally. Restarting the instrument a second time should clear the problem. A persistent failure to start indicates a serious internal problem. The message that appears briefly on the display provides some information about the cause of the failure. The most likely cause is that the internal optics have become misaligned (probably through undue shock) or the spectral calibration source has failed. Contact Coherent with as much detail about the display message as possible (refer to “Obtaining Service” on page 49). 41