Download Licensing your software

10.3.1
Tiling toolbar
When you install a license for the Production Option, the
tiling button is added to the first toolbar. It is enabled
whenever a tiling is previewed. Clicking this button displays
the tiling tools in the second toolbar.
The following tiling tools are available:
Move tile edge
You can use these edit boxes to help you
define an exact tile size and position.
Lock tile edge
Click this button to lock a selected tile edge in
its current position.
10.3.2
Tiling tab
The following settings are available on the “Tile” tab of the
“Layout” bar:
Use tiling
Select this check box to activate the tiling function.
The settings you make on this tab can be grouped
together and saved in the form of a preset.
Initially, no presets are available. However, once you
have made settings on this tab, you can save them under
a defined name. The preset becomes immediately
available for selection from the drop-down list box.
It is possible to use tiling and step & repeat in
combination.
Info
This area displays the total size of your image and the
sheet size.
Overlapping
Here you can type in values for the margin of
overlapping. Printing with overlapping can help you to
piece your tiles together after printing. Overlapping
values can be defined for top, bottom, left and right
margins.
EFI XF uses the default system of
measurement set up in the operating system
— centimeters, millimeters or inches.
However, you may change this setting if you
wish. Refer to “Edit menu” on page 4-2 for
further details.
Print tile number
Choose whether you want to print each tile with a
consecutive number. This can help you to piece the
image together in the right order after printing. The tile
numbers are printed outside the actual tile area so as not
to mar the image.
EFI XF v3.1
Production Option
10-3