Download User manual for

Introduction
PC requirements
free disk
space [MB]
C2D 2,6GHz
P4
C2D 2,6GHz
P4
P4
1000
512
1000
512
512
1000
400
1000
400
400
USB 1.1
RAM [MB]
XP
2000
XP
2000
2000
USB 2.0 high
speed
CPU
2x BeeHive204AP-AU
BeeHive204AP-AU
2x BeeHive204AP
BeeHive204AP
BeeProg2AP
OS - Windows
Minimal PC requirements
-
1024 x 768 is minimal monitor resolution.
free disk
space [MB]
C2Quad
C2D
C2Quad
C2D
C2D
2000
1000
2000
1000
1000
2000
1000
2000
1000
1000
2x USB 2.0
high speed
controllers
RAM [MB]
Win 7
Win 7
Win 7
Win 7
Win 7
USB 2.0 high
speed
CPU
2x BeeHive204AP-AU
BeeHive204AP-AU
2x BeeHive204AP
BeeHive204AP
BeeProg2AP
OS - Windows
Recommended PC requirements
We recommended using higher monitor resolution as 1024 x 768.
These PC requirements are valid for 3.09/10.2014 version of control program for
programmers. For other version see www.elnec.com.
If two programmers are to be connected to a single PC, then we strongly recommend
connecting each programmer to separate USB 2.0 High speed controller (USB EHCI). For
more information see "Hardware setup" chapter.
Free disk space requirement depends also on used IC device size and number of attached
programming sites. For large devices the required free space on disk will be approximately
1000MB + 2x Device size x number of programming sites attached to this PC.
Very easy indication, if your PC in hardware/software configuration is good enough for the
current software version and current situation with PG4UW/PG4UWMC, is to run Windows
task manager (Ctrl+Alt+Del) and see the performance folder. It has to be max. 80% of CPU
usage at full run of programming system.
9