Download Fast Loop Module, FLM, User`s Manual

Transcript
10
Mounting
The FLM must be mounted to a vertical
face or wall for function of the flowmeter
and to allow for gravity to assist in draining
the system. Mount the FLM as close to
the analyzer inlet system or analyzer as
possible.
The FLM is designed to flow with fast loop
(process) connections on the left and the
outputs to the analyzer on the right. System
operation is not recommended in any other
orientation.
The mounting holes are designed to fit
over the bolt heads and assist in mounting.
Attach with 1/4 in. fasteners with a
maximum head size of 1/2 in. (not provided)
in the four mounting holes on the plate.
Dimensions, in inches (centimeters), are for
reference only and are subject to change.
1/4 in. Fast Loop Module
Top
4 mounting holes for
1/4 in./6 mm socket
head cap screw or
hex head bolt
0.40 (1.02)
0.35 (0.89)
1.50
(3.81)
7.50
(19.0)
13.0
(33.0)
13.5
(34.3)
Left Side
1.71 (43.4)
Right Side
Grab sample
outlet (option)
Fast loop outlet
Return from
analyzer
0.69
(1.75)
11.9
(302)
Fast loop inlet
9.90
(251)
Relief outlet
(option)
Purge in
Out to
analyzer
0.92 (23.4)
4.56
(116) 5.24
(133)
7.97
(202)
11.0
(279)
12.8
(325)
Drain/vent
Drain/vent
Only available through authorized
Swagelok sales and service representatives.
7.15
(182)
Weight
22 to 27 lb (10.0 to 12.2 kg)
A Swagelok Pre-Engineered Subsystem
Fast Loop Module