1
Download Hitachi Command Control Interface
Transcript
raidcom disconnect path Error message Executing / Async Error code SSB1 Description SSB2 CMDRJE Executing 2E20 4400 WWN is not registered. CMDRJE Executing 2E20 4500 There is no path group. CMDRJE Executing 2E20 4500 external_wwn is not defined. Get Command Status Async 2E30 001E Online from the mainframe host. CMDRJE Executing 2E30 8400 The attribute of a port is not External(ELUN). CMDRJE Executing 2EDA 00EE The command cannot be accepted. After a while, execute the same command. Get Command Status Async 2EDA 0905 An internal error occurred by the operation of a path for an external path. Call Hitachi Data Systems Support Center. Table 9-63 SSB codes that are returned by raidcom delete path command raidcom delete path Error message Executing / Async Error code SSB1 Description SSB2 CMDRJE Executing 2E00 4500 The path group is not in a effective range. CMDRJE Executing 2E00 8400 The value of the specified port is incorrect. Get Command Status Async 2E10 4303 The path operations cannot be performed for the following reasons: • The target of the specified path group is TagmaStore USP/TagmaStore NSC. • The specified path group contains the external volume that is set the reserve attribute from the host. Get Command Status Async 2E11 8011 The operation cannot continue because the microcode is being replaced. CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while, execute the same command. CMDRJE Executing 2E20 4100 There is no external volume group. CMDRJE Executing 2E20 4300 There is no external connection path. CMDRJE Executing 2E20 4400 WWN is not registered. CMDRJE Executing 2E20 4500 There is no path group. Get Command Status /Async CMDRJE Executing 2E23 4300 Get Command Status /Async Paths cannot be deleted because there are no normal paths. CMDRJE Executing 2E30 8400 The port attribute is not External (ELUN). CMDRJE Executing 2EDA 00EE The command cannot be accepted. After a while, execute the same command. 9–92 Troubleshooting Hitachi Command Control Interface User and Reference Guide
