Download Hardware User Manual EVAL-BF5xx DEV-BF5xxDA

 Tinyboards maximum performance at minimum size o Emulates a standard COM port on the computer.
o Drivers for Windows and Linux available
ƒ
JTAG
o JTAG-Plug that supports all analog Devices JTAG Emulators.
ƒ
Expansion Connector 1
o SPORT 0
o UART
o SPI
o PPI1 (Parallel Port Interface 1)
o PFs (Programmable Flags)
ƒ
Expansion Connector 2
o Data Bus
o Address Bus
o Memory Control Signals
o PPI21 (Parallel Port Interface 2)
o Power Supply
ƒ
2nd USB Connector (optional)
o Can only be used together with the CM-BF527 including USB2.0 OTG
interface or the CM-BF537U Core Module which has an on-board NETPLX
2272 USB2.0 Device Chip.
ƒ
RJ-45 Ethernet Plug
o Only in combination with the CM-BF527 and the CM-BF537E module
o Standard 10BaseT/100BaseT Ethernet connection
ƒ
External Power Supply
o The board is shipped with a 12V, 2A external DC/DC Power Supply
1
Only available when using the CM-BF561 Core Module
Blackfin EVAL‐BF5xx and DEV‐BF5xxDA‐Lite Hardware User Manual Page 2