Download Wireless Dock / Receiver ot

Problem 2- your RothDock and Wireless LAN are
on the same frequency set and won't both work at
the same time.
Solution 2 -- Follow the steps below to change the
frequency on which your RothDock works
A) There are 11 channels in the wifi system we use. When the
RothDock and the wireless access point are using the same
channel there can be interference. The solution is to change
the channel of the Rothdock or wireless access point. It's
probably easier for you to change the channel of the
RothDock, as follows:
Press and release the reset button on rothdock within 5 sec
(simply 1 click) and then the interference should be greatly
reduced. You may repeat this until the interference is
minimized, Le. press for another 5 seconds and the
frequency set changes again, etc.
After changing the wireless channel you need to
resynchronize the dock and the receiver as per Solution 1
above.
The above are the only two known wireless application problems
that you might have - I hope this helps resolve any issues that
you might experience.