Download Installation & Operating Instructions
Transcript
Both an installation manual with technical data and a manual on general use and maintenance are enclosed with this product. The installation can only be used after it has been inspected by a qualified inspector. A name plate of heat-resistant material is affixed to this product. This contains information about identification and documentation for the product. Installation introduction with technical data Important note: These instructions combine several models of stoves, therefore certain sections in this manual relating to the installation & technical data for each stove will vary. 1.0 Technical data. (Bela Vista, Grande Vista, Vista Panoramica, Vista Quente). Material: Cast iron Finish: High-temp resistant paint Fuel: Multi-fuel (Approved wood logs & smokeless fuels) Log length: 32cm maximum Stove outlet collar positions: Top and rear Stove collar dimension: Internal diameter 125mm / 113cm2 cross section Approx. weight: 89kgs Dimensions, distances etc: Figure 2 Technical data according to EN 13240+A2:2004. (Bela Vista, Grande Vista). Nominal heat output: 7.5kw (wood) 7.0kw (smokeless fuel) Flue gas mass flow: 5.3 g/sec (wood) 5.6g/sec (smokeless fuel) Recommended chimney draught: 12 Pa Efficiency: 75.6% (wood) 73.5% (smokeless fuel)