Download kullanim kilavuzu (user manuel) en81

HT-53 Symbols of the Control Card
R,S,T
MP
10A
120
130
140
PTC-1
PTC-2
RBO
RBA
LO
LA
RPA
RPB
RLA
RLB
SAK
KAK
KSO
UP
DWN
V3
V2
V1
V0
PIN
EN
COM
100
1000
HZR
KRC
EN+
ENENA
ENB
Main Phase
Neutral
Safety Circuit Neutral Return/ Neutral Output of the Contactors
Stop Circuit
(max 230vac)
Door Plug Contact Circuit
(max 230vac)
Door Lock Circuit
(max 230vac)
Motor Thermistor & Panel Thermostat & Oil Thermostat (Hydraulic) &Break Resistance
Thermostat
Motor Thermistor & Panel Thermostat & Oil Thermostat (Hydraulic) &Break Resistance
Regulator Coil Joint
Regulator Coil Openness
Door Pump Relay Contact Joint
Door Pump Relay Contact Openness
Engine Contactor Output is Used İn VVVF and Hydraulıc (RPA,RPB)
Engine Contactors input (RPO RPA)
Spare
Spare
Main Phase Active Contactor
Rescue Active Contactor
KAK SAK Joint
Up Direction Relay Output
Down Direction Relay Output
High Speed Relay Output
Intermediate Relay Output
Revision Speed Relay Output
Low Speed Relay Output
Error Reset (not used)
Releveling Relay Output
V0-V1-V2-V3-En Relay Joint
Card Supply Input (+24v dc)
Signal Circuit Graund
Ready Information Coming From the Driver
Feedback Input of the Main Contactor. The 100 signal should be connected to this input by
series passing the closed contacts of the main contactors.
Encoder Supply Voltage Output (+5v dc)
Encoder Supply Voltage Output (-5v dc)
Encoder ‘A’ channel
Encoder ‘B’ channel
5