Download User`s Manual
Transcript
LNX-1212GN-SFP-T User’s Manual 5.1.5.2 MSTP Bridge Settings This page allows you to configure RSTP system settings. The settings are used by all RSTP Bridge instances in the Switch Stack. Label Protocol Version Description The STP protocol version setting. Valid values are STP, RSTP and MSTP. The delay used by STP Bridges to transition Root and Designated Forward Delay Ports to Forwarding (used in STP compatible mode). Valid values are in the range 4 to 30 seconds. The maximum age of the information transmitted by the Bridge Max Age when it is the Root Bridge. Valid values are in the range 6 to 40 seconds, and MaxAge must be <= (FwdDelay-1)*2. This defines the initial value of remainingHops for MSTI information generated at the boundary of an MSTI region. It Maximum Hop Count defines how many bridges a root bridge can distribute its BPDU information. Valid values are in the range 4 to 30 seconds, and MaxAge must be <= (FwdDelay-1)*2. The number of BPDU's a bridge port can send per second. When Transmit Hold Count exceeded, transmission of the next BPDU will be delayed. Valid values are in the range 1 to 10 BPDU's per second. Click to save changes. Click to undo any changes made locally and revert to previously saved values. MSTI Mapping This page allows the user to inspect the current STP MSTI bridge instance priority configurations, and possibly change them as well. Antaira Technologies 37