Download element14 BeagleBone Black
Transcript
6.2.4 Crystal Circuitry Figure 30 is the crystal circuitry for the AM3358B processor. Figure 30 Processor Crystals 6.2.5 Reset Circuitry Figure 31 is the board reset circuitry. The initial power on reset is generated by the TPS65217C power management IC. It also handles the reset for the Real Time Clock. The board reset is the SYS_RESETn signal. This is connected to the NRESET_INOUT pin of the processor. This pin can act as an input or an output. When the reset button is pressed, it sends a warm reset to the processor and to the system. On the revision A5D a change was made. On power up, the NRESET_INOUT signal can act as an output. In this instance it can cause the SYS_RESETn line to go high prematurely. In order to prevent this, the PORZn signal from the TPS65217C is connected to the SYS_RESETn line using an open drain buffer. These insure that the line does not momentarily go high on power up. element14 is a trademark of Premier Farnell plc © 2014 Premier Farnell plc. All Rights Reserved 51