1
Download OK - Honeywell Access Systems
Transcript
45 Setup To Define Serial Ports 1. From the Setup menu, Select Serial Ports. The Serial Port Setup dialogue box opens. Setup NOTE: Do not enable a serial port if you have a serial mouse attached to it. Errors will be generated. NOTE: Verify that the communication ports are supported by the operating system. Ports not supported by the operating system will not function for WIN-PAK. 2. For each needed port (row): a. Enable the ports that you will be using by clicking the box in the row under Enable. An “X” indicates that the port has been enabled. These ports are available to define areas in the Areas Database.
