Download User Manual - GC-SAT

Commands for troubleshooting the SBU
G.2.2
Description of the status report
The status report consists of up to seven parts:
1. Report header
2. ARINC driver configuration
3. The overall status for the ARINC driver
4. Status for the Primary ARINC Receiver
5. Status for the Secondary ARINC Receiver, if configured
6. Status for the ARINC Antenna modem, if configured
7. Low level ARINC-429 counters
Below is a detailed description of each part of the status report.
STAT Report
The following lines are part of the standard system header, there is no information
relevant for the ARINC interfaces present in the header, you may just ignore these
lines:
STAT Report
Module: ARINC, Status: Ok, Message:
REPORT: SHORT
CONFIGURATION
The configuration part is just a mirror of the ARINC information already available from
the 'External systems' web page of the SBU.
STATUS ARINC DRIVER
Current Time: This is the current UTC time, if available. In this example the year 1970
indicates that the UTC time not yet is available.
Read the following overview information in the following way:
Interface
Primary Receiver Secondary Receiver Antenna Modem 98-127093-E
State number and name
Status
6 RO_6_IRS_CONNECTED Lost‐Label Forwarding forwardingPeriods:1 0 RO_0_NULL
1 RT_1_INIT Source
Source Activations
Await‐Label Standby forwardingPeriods:0 Await‐Label Appendix G: Using terminal commands
G-3