Download AEROS9040

Aeros 9040 Field Computer
INTRODUCTION
Next Guideline Feature
If more than one guideline is saved, the Next
Guideline feature will become available. By
pressing the Next Guideline option, the vehicle will be directed to
the next guideline saved in the console.
HOME
To change to other available guidelines:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab
display navigation options.
2. Press NEXT GUIDELINE icon
to
.
Toggle between all guidelines by pressing the NEXT GUIDELINE
again.
icon
FULL SCREEN
Figure 7-24: Next Guideline
-13
Last Pass Guidelines
Last Pass Guidance offers true last-pass navigation. The
console will automatically detect the nearest applied area and
establish parallel guideline based on that area.
To activate Last Pass guidelines:
1. Drive to a desired location to apply the first pass.
2. Travel next to the applied area.
3. The console will begin providing navigation information.
NOTE: If a boundary is established but no application occurred
during the boundary process, guidance will not initiate.
Figure 7-26: Apply First Pass
3:22 PM
0.0
7.2
mph
7.2
mph
A
A
SETUP
Figure 7-27: Follow Guidance
GNSS
To view which guideline is active, press the Guidance Mode icon on
the Status Bar.
Figure 7-25: View Which Guideline is Active
-13
IMPLEMENT
0.0
Guidance Pattern: Circle Pivot Guidance
Guideline Name: Stream Edge
Total Number of Guidelines: 4
GUIDANCE
RATE CONTROL
APPENDIX
78
www.teejet.com
7.2
mph
4:16 PM
0.0
7.2
mph