Download H-Designer

Transcript
Recipes
The following are the words and their names in the controller. The words related to
read/write recipes are highlighted with a light blue background. Please see the chapter
Control and Status Block for complete details.
Controller Internal Data Block
Control
Block
Status
Block
Recipe
Register
Word
W0
W1
W2
W3
W4
W5
W10
W11
W12
W13
W14
W15
W100
W101
W102
W103
W104
0
0
0
0
1 2
.....
1
2
1 2
.....
1
2
Bit
.....
4 5 6
.
.
.
.....
.
.
.
.....
4 5 6
.
.
.
.....
.
.
.
.
.
.
1
0
0
0
3
.
.
.
13 14 15
.....
13 14 15
13 14 15
.....
13 14 15
Member
SNR
CFR
LBCR#1
LBCR#2
LBCR#3
RNR
SSR
GSR
LBCR#1
LBCR#2
LBCR#3
RIR
1st recipe, 1st word
1st recipe, 2nd word
1st recipe, 3rd word
1st recipe, 4th word
1st recipe, 5th word
CFR bit # 4 is the Recipe Write Flag; bit # 5 is the RCPNO Change Flag;
bit # 6 is the Recipe Read Flag.
GSR bit # 4 is the Recipe Write Status; bit # 5 is the RCPNO Change Status;
bit # 6 is the Recipe Read Status.
3. Set up RNR to read recipe # N. W5 in the controller is assigned to read recipe #
N from the operator terminal. For example, 1st recipe N = 1.
4. Then set RCPNO Change Flag to ON for about 1 second. The operator terminal’s internal RCPNO and Current Recipe will be changed to read recipe # N.
Remember to set the RCPNO Change Flag to OFF before re-triggering.
Status Block: When the value of RCPNO is changed, the value of RIR (W15) will
also be changed. The current recipe # N can be checked on the controller. Moreover,
if the RCPNO Change Flag is set to ON, the GSR bit (W11 bit # 5) will also be set
to ON. The status bit will turn OFF automatically after RCPNO is changed.
For details on addressing recipe data, please see the chapter Addressing Recipe Data Enhanced Operator Terminals.
166
Beijer Electronics, MA00822