Download Original Instruction Manual

11. Maintenance
Periodic maintenance of the machine is necessary to maximise longevity
of the machine. The maintenance procedures detailed below aim to
provide guidance for most routine areas of maintenance but should not be
considered to be an exhaustive list.
After Each Use of the Machine
Clean the machine with a soft brush and use a suitable high filtration dust
extractor to remove residual waste.
Check all components for sign of wear or damage and replace as necessary.
Ensure the dust extraction outlet is clear of any obstructions and the dust
extraction machine is in full working order.
Weekly
Clean and lubricate the following parts using a silicone based spray such as
CWA195 Silicone Spray or similar dry lubricant. Do not use oil:
Table trunnion mechanism.
Bobbin spindle threads.
Table adjustment components.
Clean the worktable surface using white spirit or similar. Do not use thinners
as damage to the paint finish may occur. After cleaning, apply silicone spray
or similar to the table for added protection.
Monthly
Check for free movement and rotation of the oscillation mechanism.
If problems are found please contact Record Power for assistance.
15