Download "user manual"

Transcript
8
P/N 30-3901
AIRFLOW METERING
The Porsche 997.1 Turbo is equipped with two MAF (Mass Air Flow) sensors and one pre-throttle body
charge pressure sensor. The Infinity supports both the factory mass airflow sensors and boost pressure
sensor. Users can also add a MAP (Manifold Absolute Pressure) sensor and use the speed density
airflow algorithm instead.
Note: If adding an external MAP sensor, users must disconnect the electrical connection from
the OEM Porsche boost pressure sensor to the Infinity.
Mass Airflow Setup
Setup Wizard
To enable MAF on the Infinity, use the setup wizard's "Engine" tab to select "0-5V MAF" or "Frequency
MAF" as the airflow calculation method. Users can choose a number of options for the main spark map
load axis. The example below shows "MassAirflow [gms/rev]" as the main spark load axis. The 997.1
Turbo base calibration will have this pre-configured for use on a stock 997.1 Turbo.
© 2015 AEM Performance Electronics