Download Minipack, PS System

Introduction
The Smartpack based Product Range
Eltek Valere's Smartpack based product range utilizes the Smartpack controller, and Flatpack2
rectifiers, Powerpack rectifiers and Minipack rectifiers as building blocks for implementing
effective DC power systems, suitable for a wide range of applications and power ratings.
Powerpack System
Flatpack2 System, Cabinetized
Indoor and Outdoor Cabinets
Flatpack2 System, Integrated
4U and 1U Distributions
Minipack System, Integrated
Cabinetized systems are suitable for indoor or outdoor applications. In addition to the power
system and the distribution unit, the cabinet may also contain battery banks, additional
distribution and other dedicated equipment.
Integrated systems consist of the power system, which includes rectifiers and controller(s), and
the distribution unit (1U or 4U high). Integrated systems are sold primarily for mounting in
existing cabinets.
Powerpack systems are suitable for large Central Office power plants, and use three-phase
rectifier modules.
Minipack systems are suitable as small, stand-alone battery chargers and DC power supplies.
Brief System Description ⎯ Minipack
The Minipack PS system is a compact and cost-effective DC power supply system, specifically
developed for the telecom industry.
Alarm Outputs NC-C-NO
Digital Inputs
Minipack
Remote
Monitoring
Smartpack
(Ctrl. Unit)
AC Fuses,
external
(230V)
PowerSuite
Application
USB cable
Fuse Alarm
LVLD
CAN Bus
Telecom
equipment
Minipack rectifiers
AC Supply
(Single- or
three-phase)
Symmetry
Alarm &
Temp. Sensor
LVBD
Load Fuses
& MCBs
Battery
Fuses
DC
distribution
DC Supply
48V
*
Battery string #1
Example of a typical Minipack PS system for DC power supply of telecom equipment. The
system is supplied from an external AC mains supply, and is delivered in one power shelf for
integration in existing cabinets (integrated). An external battery bank is to be connected.
2
Quick Start Guide Minipack PS System
356808.103, 1v1-2007-03