Download BROADCASTER

BROADCASTER USER MANUAL
26
This section allows configuration of the USB WiFi dongle or PCI card installed on the Broadcaster.
Here can be defined the parameters of the WiFi access point to which the Broadcaster has to connect.
Wireless Device Status – allows enabling or disabling of the wireless device.
SSID Name – here has to be set the SSID name of the wireless network.
Encryption – used to define the encryption method of the wireless network. The possible options are
WPA and WEP.
Encryption Mode - used to define the encryption mode of the wireless network. The possible options
are 64 bits or 128 bits.
Encryption Key - here has to be set the encryption key for the wireless network.
Encryption Key Type - used to define the encryption key type of the wireless network. The possible
options are String or Hex.
Mode - used to define the mode of the wireless network. The possible options are Managed or Ad-Hoc.
IP Via – allows the IP address to be configured using a Static IP Address or DHCP configuration
(Dynamic IP Address).
Static IP – this is the static IP address assigned to the WiFi interface
Netmask – this is the netmask assigned to the WiFi interface
Uplink Gateway – this is the uplink gateway assigned to the WiFi interface.
DNS Server – this is the DNS server for the WiFi interface.
3G Management
SysMaster Corporation