Download Concept Functionblocks for Heating, Ventilation & Air Condition

Transcript
PI_VAC
PI_VAC
PI controller for air conditioning
1
Brief description
The PI_VAC basic function block is a general PI–controller designed for air conditioning
applications. It can be used for temperature control, humidity control, air mixing control or
other general functions. As it is a basic function block it consists of a PI controller only
with no setpoint compensation, output sequencing, or other functions. It is used
extensively by the complex function blocks.
Where the standard complex function block library does not meet the requirements of a
particular application, the PI_VAC basic function block can be combined with other basic
function blocks to create the user’s own complex function block using the Concept
Derived Function Block facilities.
The EFB provides the following :
H
H
H
H
H
H
H
H
H
H
H
SP (setpoint), PV (process variable) and BIAS inputs.
Ability to operate in P, I, or PI modes
Bump–less initialization of the I contribution as well as bump–less switching
between I and PI operation
Presetting the controller’s gain in the form of GAIN or PROP with the possibility of
using negative values for switching the control direction.
Bump–less switching between GAIN and PROP operation in the case of PI control.
Operation with Anti–Windup–Reset (AWR)
Manual operation mode with tracking of the I contribution in order to provide
bump–less switching back to automatic mode.
HALT operating mode for freezing the controller output at its current value with
tracking of the I contribution
DYNAMIC HALT operating mode that prevents step–changes in the controller
output when the setpoint is changed.
Upper and lower limits on controller output with indication when limits are reached
using the QMAX and QMIN outputs.
The display of the PI controller error (SP–PV).
Note
Additional parameters EN and ENO should not be configured.
You will find this EFB in the HVAC library.
00
Width: 185 mm
Height: 230 mm
45