Download Concept Functionblocks for Heating, Ventilation & Air Condition
Transcript
PI_VAC PI_VAC PI controller for air conditioning 1 Brief description The PI_VAC basic function block is a general PI–controller designed for air conditioning applications. It can be used for temperature control, humidity control, air mixing control or other general functions. As it is a basic function block it consists of a PI controller only with no setpoint compensation, output sequencing, or other functions. It is used extensively by the complex function blocks. Where the standard complex function block library does not meet the requirements of a particular application, the PI_VAC basic function block can be combined with other basic function blocks to create the user’s own complex function block using the Concept Derived Function Block facilities. The EFB provides the following : H H H H H H H H H H H SP (setpoint), PV (process variable) and BIAS inputs. Ability to operate in P, I, or PI modes Bump–less initialization of the I contribution as well as bump–less switching between I and PI operation Presetting the controller’s gain in the form of GAIN or PROP with the possibility of using negative values for switching the control direction. Bump–less switching between GAIN and PROP operation in the case of PI control. Operation with Anti–Windup–Reset (AWR) Manual operation mode with tracking of the I contribution in order to provide bump–less switching back to automatic mode. HALT operating mode for freezing the controller output at its current value with tracking of the I contribution DYNAMIC HALT operating mode that prevents step–changes in the controller output when the setpoint is changed. Upper and lower limits on controller output with indication when limits are reached using the QMAX and QMIN outputs. The display of the PI controller error (SP–PV). Note Additional parameters EN and ENO should not be configured. You will find this EFB in the HVAC library. 00 Width: 185 mm Height: 230 mm 45